最新新闻

首页 > 最新新闻
路沿石钢模具需要注意哪些问题
发布人:管理员   发布时间:2020-12-15

路沿石钢模具预制较大构件或较重构件时容易变形,建议使用木板夹好或使用卡子或使用做好的铁框子。
It is easy to deform when large or heavy components are prefabricated by stone steel mold along the road. It is recommended to use wood plate or clip or iron frame.

夏天温度较高时预制构件必须蒙上麻袋片或稻草袋或遮阳网,以防太阳晒裂预制件,并按时洒水养护需要做带孔的预制块时所用的管子必须及时抽出,放止时间长了抽不出来。
When the temperature is high in summer, the prefabricated components must be covered with sacks or straw bags or sunshade nets to prevent the prefabricated parts from cracking in the sun. The pipes used for making prefabricated blocks with holes must be drawn out in time and cannot be pulled out after a long time.

  

路沿石钢模具脱模后暂时不用的模具必须在清理后摆放整齐防止变形。脱模时使用的敲击工具必须是木锤或皮锤。脱模时要用脱模器或下面垫麻袋片或垫稻草袋或废轮胎,以防损坏预制件和模具。
After demoulding, the unused molds must be placed in order to prevent deformation. The percussion tool used in demoulding must be wooden hammer or leather hammer. When demoulding, the demoulding device or burlap bag or straw bag or waste tire should be padded under it to prevent damage to the preform and mold.

震动平台上要经常清理,保持平整,收工时清理干净。预制较大构件时,若模具直接放在地上用振动棒时,振动棒头上必须套上皮套,否则可能减少模具使用寿命。
The vibration platform should be cleaned regularly, kept flat, and cleaned up after work. If the mould is placed on the ground directly, the vibration life of the mould must be reduced if it is placed on the ground.

 

上一篇:没有了